My Grill Burner does not have a high and even flame.

1. Your venturi tubes on your burner may have a blockage, thus not allowing enough gas and air flow to reach the burners. To correct this, you will need to remove the burner to access the venturi tubes. Use a venturi brush by pushing it through the entire tube while turning. Pull out the venturi brush and examine for any debris. BE AWARE, spiders are attracted to the smell of gas, and may have taken residence in your venturi tubes. To prevent this, make sure the spider gaurds are protecting the air intake holes at all times.

2. Your burner port holes may be blocked, thus not allowing and even flame across your burner. To correct this, simply clear the debris out by poking blocked holes with a paper clip (or another tool small enough).

Back